See what our Experts say about this Gen-Y Hitch Car Ramps

• How Wide is Ramp Hook of Gen-Y Hitch Aluminum Loading Ramp Set
  The hook opening of the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72 is two inches wide. I attached a picture that shows where the measurement is taken.
  view full answer...
  
• What do the Feet of the Gen-Y Hitch Aluminum Loading Ramp Set Look Like?
  I went out to the warehouse and took a look at the Gen-Y Hitch Aluminum Loading Ramp Set item # 325-GH-R72. I have linked a picture below that will show you what the bottom end of this ramp looks like. This ramp set is 72" long x 14" wide and has a total capacity of 6,000 lbs. I have linked a review video below.
  view full answer...
  
• Where are Stallion 288-07503 Aluminum Car Hauler Ramps Manufactured
  The Stallion # 288-07503 loading ramps are manufactured in China. For a US made alternative, check out the Gen-Y Hitch Heavy Duty Aluminum ramp set which measure 72 x 14 inches which we offer as part # 325-GH-R72. I've linked to a demonstration video for the Gen-Y ramps.
  view full answer...
• Why is there a Height Limit on Aluminum Car Hauler Ramp Set 288-07502
  The height restriction on ramp set # 288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them. The shorter the ramp the more severe the angle will be as the loading height increases. You could go with longer (and tougher) ramps using the Gen-Y options such as # 325-GH-R72, # 325-GH-R84, or # 325-GH-R96. These ramps will last pretty much forever since Gen-Y is known for making products...
  view full answer...
• Trailer Loading Ramps Needed for a Trailer Floor that is 22 High
  I do have a solution for you, but the Aluminum Car Hauler Ramp Set # 288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum loading ramps don't have a height restriction as they leave that up to the customer's discretion. Their part # 325-GH-R72 has dimensions of 72" long x 14" wide and they also have a 6,000 lb weight capacity. To ensure that you can safely load your trailer I recommend trying...
  view full answer...
• Recommended Loading Ramp for a Honda Goldwing Trike Motorcycle
  The best option we have is to use the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R7 together with the Replacement Gen-Y Hitch 72" Aluminum Loading Ramp # GY96FR for a total of 3 ramps. These ramps have a 3K capacity each, measure 72" long x 14" wide, and has sturdy hooked ends which will attach to your trailer deck.
  view full answer...
• Thickness of Gen-Y Hitch 72" Aluminum Loading Ramp
  The thickness is 2-3/4 inches for the Gen-Y Hitch Aluminum Loading Ramp Set - 72" Long x 14" Wide # 325-GH-R72.
  view full answer...
• Aluminum Loading Ramps Capable of Loading up to 6,000LBS, 20 Off The Ground
  First the Stallion Aluminum Car Hauler Ramp Set # 288-07503 has a 16" maximum height so you will want to use the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72. These ramps are also 72" long and have the same 6,000lb rating for the set. They do not have a maximum height limit but be sure to use your best judgement based on what you are loading and will work fine for your 20" height. We do not carry any channel that you will be able to mount on your trailer or storage shed. You will...
  view full answer...
• Are There Trailer Ramps for Loading Cars That Keep Front End Up for Door Clearance
  We have options for loading ramps for a trailer to load up your vehicle, but none that are 10 inches or keep the front end up for door clearance when towing. Each of the available ramps hook onto the trailer and need to be removed after use; they are different lengths, widths, and capacities so you can get the one that will work for your vehicle. - 72" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72 - 84" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum...
  view full answer...
• Trailer Ramps That Minimize Tire Slippage for Loading Lawn Mower
  I have a solution for you and you might be able to make the Car Hauler ramps you were looking at work without worry about slippage, but I think we can offer something better. From what I've seen, even if you've got molded wheels on your mower they likely have some sort of rubber treading to provide traction on a variety of surfaces. Because of this, you should be able to use the Car Hauler Ramp Set # 288-07501 without worrying about slippage- but we also have to worry about the width...
  view full answer...
• Will Gen-Y Hitch 72" Aluminum Loading Ramps Hook On To 1-1/4" Round Pipe On Rear Of Trailer?
  I reached out to my contact at Gen-Y and they were able to confirm that the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72 you were looking at will work perfectly on the 1-1/4" round bars on the back of your trailer. I included a video of the # 325-GH-R72 for you to take a look at.
  view full answer...
• Height Recommendation for 72 Inch Gen-Y Aluminum Ramps
  I reached out to my contact at Gen-Y Hitch and the Aluminum Ramps # 325-GH-R72 have an optimal angle for 12-20 inches height based on the angle on the bottom, but he said they can handle whatever angle your want at the full 6,000 lb capacity. They are rated for the ramps to take the full 6K as flat plank style bridge, so they can handle whatever angle you feel safe loading with them.
  view full answer...
• Aluminum 6,000LB Car Hauler Ramps For a 20 Year Old Big Tex Trailer
  To determine if you will be able to use the Aluminum Car Hauler Ramp Set # 288-07502 will fit your Big Tex trailer you will need to take some measurements on your trailer. The tabs which fit into the tracks are 1" deep and 1/4" thick. These 60" ramps have a 16" maximum height to the top of the channel. If the end of your trailer is taller than 16" we have the 72" Gen-Y Ramps # 325-GH-R72
  view full answer...
• Do the Gen-Y Ramps Have Hooks On The Ends of the Ramps and Add-On Plate For Attachment
  The Gen-Y 72" Ramps # 325-GH-R72 do have hooks on the end to help make connection to the trailer easier and more stable, but there isn't an additional plate that can be added to a trailer specifically for this application. With that said, you might be able to fabricate something for this to suit your own needs; however from some of the feedback I've heard from customers who have used these, they do a pretty good job of staying in place.
  view full answer...
  
• Are There Trailer Loading Ramps That Attach to Pivot Bar
  Hi Greg, There aren't any trailer loading ramps we offer that attach to a pivot bar. Each of our ramps, like the Gen-Y # 325-GH-R72, need to attach to the deck of the trailer.
  view full answer...
• What Does Gen-Y Hitch Aluminum Loading Ramps # 325-GH-R72 Weigh
  For the pair of ramps that come with the # 325-GH-R72 the total weight is 61 lbs.
  view full answer...
• How Large is the Hook Opening on the Gen-Y Hitch Aluminum Loading Ramp Set 6K 72"
  The opening of the hook on the Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R72 is 2" deep which you can see in the attached photo.
  view full answer...
  
• Is There Any Special Care Needed For The Gen-Y Aluminum Loading Ramps?
  That's a great question Art. I reached out to Gen-Y as I could not find any special instructions or care manual for the ramps. They simply said all you need to do to care for their Loading Ramps # 325-GH-R72 is keep them clean and free of any dirt, grime, or salt. For storage I recommend just keeping them somewhere dry and away for any chemicals which can be harmful to aluminum.
  view full answer...
• Aluminum Ramps For Car Hauler Trailer Closest to 5' Long x 13" Wide
  Hey Steve, The aluminum loading ramps we have that are closest to the 5' long x 13" wide measurements you mentioned are the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72. This set is 6' long x 14" wide so have the right width for your ramp carriers and are just a foot longer than your current set. These weigh 31 lbs per ramp so they're less than half the weight of what you have now, so will be quite a bit easier to handle.
  view full answer...
• Recommended Loading Ramp For Maserati With 12 Inch Wide Tires
  The Stallion # 288-07503 Car Hauler Ramps are a total of 14-1/2 inches wide, which includes the raised edges. These ramps would accommodate your 12 inch wide tires but keep in mind that the tire would ride on the raised edges. I'd suggest going with something without the raised edges like the # 325-GH-R72 from Gen-Y. We do have some ramps that are a bit wider, but they lack the capacity needed for a passenger vehicle
  view full answer...
• Recommended Aluminum Loading Ramp
  Davinder, it sounds like you're looking for aluminum ramps which we do carry, and you can use the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72. This ramp is made of Aluminum, measures 6' x 14" wide, and has a max capacity of 6,000 lbs. If you're looking for something else let me know and I'd be happy to help.
  view full answer...
• Is There a Replacement Ramp Available for the Gen-Y Hitch Aluminum Loading Ramp Set
  You can order the full set of the Gen-Y # 325-GH-R72 and then an additional ramp with # GY96FR, which would give you 3 total ramps. These ramps are 72" long and have a capacity of 3000-lbs each.
  view full answer...

Do you have a question about this Car Ramp?